Recent content by oldbbb

less outside of the 8-zone was my goal

Nope, the groups are smaller with the 1.0 sight. I just seem to shoot better with the smaller sight picture.

True, but mine is steel faced :)

Installed a Bodyguard 1.0 rear sight, old new the original was a real bear to get off. I had to use a steel punch and a 2 pound dead blow hammer to get the thing off. I was able to install the 1.0 with a brass punch. Sighting in was 100 rounds CCI Blazer Brass 95 gr FMJ. and 25 rounds...

The Winchester were Flat Nose FMJ and I had no problems. I really don't like Winchester because of how dirty it is. Of the 345 rounds just the one issue and it was after I fired the Winchester come to think of it.

Bought a BG 2.0, date on box was 01/22/2025, cleaned it and found a small bur on the edge of one of the rails, hit it with some emery cloth. Lubed with oil and used PTFE fine powder in the striker channel and in the mags. Loaded the mags and locked back the slide for seven days. Took the new...

Because I do carry a short barrel, I use Sellier & Bellot XRG Defense 9mm Luger 100 gr Lead-Free in the summer and Federal S9SJT2 Syntech Defense Segmented Jacketed Hollow Point 138 gr in the winter.

Take a look at this video () he has to press the striker safety to get the extractor out so it would seem the striker safety need to be depressed in order to get the extractor back back in.

The BG 2.0 striker safety is not under the rear sight and the manual suggest moving the rear sight on page 35. Also, if you ever need to clean or service the striker you will need to remove the rear sight (NOT suggested by me or the factory). But it seems to me if you oil the striker safety the...